Aeon Labs Aeotec Z Wave Water Sensor Results at Top10Bot.com

  • Aeotec Water Sensor, Z-Wave Flood & Leak Sensor

    We all protect our homes against fires and thefts, but, each year, more homes are damaged by small water leaks than larger disasters. Aeotec’s Z-Wave Water Sensor helps you monitor for water leaks and floods and prevent them. Super accurate, it’s capable of measuring as little as 0.03% of an inch of water. Powered by 2 x AAA batteries and with a typical battery life of over 1 year, Water Sensor is compatible with certified Z-Wave gateways including Fibaro, HomeSeer, openHab, Samsung SmartThings, Vera, and Wink.
    Aeon Labs Aeotec Z Wave Water Sensor

    • ASIN: B00H3TJ3P4
    • Color: White
    • Brand: Aeon Labs
    • UPC: 735090324254

  • Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor

    MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, ...
    Aeon Labs Aeotec Z Wave Water Sensor

    • ASIN: B0151Z8ZQY
    • Color: White
    • Brand: Aeon Labs
    • UPC: 810667023201

  • Aeon Labs Aeotec Z-Wave Water Sensor 2-Pack - DSB45-ZWUS

    The Aeon Labs Water Sensor is a battery-powered Z-Wave water sensor with an extremely small form factor. The water sensor will send radio signals up to 6 associated Z-Wave devices within its own Z-Wave network when the water probe detects water.
    Aeon Labs Aeotec Z Wave Water Sensor

    • ASIN: B01N98XD87
    • Brand: Aeon Labs
    • UPC: 841434154590

  • Aeon Labs Aeotec Z-Wave Water Sensor (DSB45-ZWUS)

    DIY INSTALLATION - NO WIRING REQUIRED. Monitor the presence or absence of water anywhere in your home or business with the Aeon Labs Aeotec Z-Wave Water Sensor. This battery-powered sensor requires no wiring and features a 3.3-foot probe cable, so you can place the sensing probe precisely where you need to detect water. If the probe detects a change in the water level, the sensor will send a wireless command to as many as six Z-Wave devices. FEATURES: Detects as little as 1/32" of water ~ Low battery detection and alerts ~ Wireless range up to 300 feet ~ Latest
    Aeon Labs Aeotec Z Wave Water Sensor
    Monitor the presence or absence of water anywhere in your home or business with the Aeon Labs Aeotec Z-Wave Water Sensor. This battery-powered sensor requires no wiring and features a 3.3-foot probe cable, so you can place the sensing probe precisely where you need to detect water. If the probe detects a change in the water level, the sensor will send a wireless command to as many as six Z-Wave devices.Detects as little as 1/32" of waterLow battery detection and alertsWireless range up to 300 feetLatest Z-Wave protocol and commandsThe Z-Wave Water Sensor comes with a bidirectional mounting plate and

    • UPC: 144452836
    • Model: DSB45-ZWUS
    • Color: tanBeige

  • Aeon Labs Aeotec DSB29-ZWUS Z-Wave Door/Window Sensor, Gen5

    Monitor the open/closed status of a door, window, cabinet, safe, or any other open/close object with the Aeon Labs Aeotec Z-Wave Door/Window Sensor, Gen5. The simply designed sensor informs your Z-Wave system of open/close events and can trigger security events. With Z-Wave Plus certification, the sensor is compatible with all major Z-Wave hubs and controllers. The Door/Window Sensor consists of two parts: the main sensor which mounts onto the door/window itself, and the magnet which mounts onto the door/window frame. When the two components are separated, the sensor sends signals to up to 5 Z-Wave devices to alert of the
    Aeon Labs Aeotec Z Wave Water Sensor
    Monitor the open/closed status of a door, window, cabinet, safe, or any other open/close object with the Aeon Labs Aeotec Z-Wave Door/Window Sensor, Gen5. The simply designed sensor informs your Z-Wave system of open/close activity and can trigger security or automation events. With Z-Wave Plus certification, the sensor is compatible with all major Z-Wave hubs and controllers.The Door/Window Sensor consists of two parts: the main sensor which mounts onto the door/window itself, and the magnet which mounts onto the door/window frame. When the two components are separated, the sensor sends signals to up to 5 Z-Wave devices to alert of

    • UPC: 163908955
    • Color: White

  • Aeon Labs Aeotec Z-Wave Multi-Sensor 6 Recessor Mount (DSE010)

    The small Aeon Labs Multi-Sensor 6 becomes even more discreet when installed with the Multi-Sensor 6 Recessor Mount. This simple bracket allows you to flush-mount the Multi-Sensor 6 into a wall or ceiling, so it becomes nearly invisible, without sacrificing functionality. Once recessed, the sensor can be tilted up to 30 degrees for the perfect field of view, while sticking out from the surface by a mere 0.04 inches. The mount is easy to install. Simply drill a 3-inch (75mm) hole into the mounting surface and snap the mount into the hole. NOTE: Sensor not
    Aeon Labs Aeotec Z Wave Water Sensor
    Easy to flush-mount in the wall or ceilingAllows power cable to run through to sensorAdjustable sensor angle up to 30 degreesTechnical DetailsMPN: DSE010Color: WhiteMax. Angle: 30 degreesDepth: 4.4cm deepDimensions: 2.95 x 2.95 x 2 inches (7.5 x 7.5 x 5.1 cm)Weight: 2.82 ounces (80

    • UPC: 159018542
    • Model: AEDSE010
    • Color: White

  • Aeon Labs ZW130 Aeotec Z-Wave Wallmote Quad

    Bring the next generation of Z-Wave control to your home with the Aeon Labs Aeotec Z-Wave Wallmote Quad. The Z-Wave Wallmote Quad takes control of up to 4 Z-Wave devices or scenes with touch sensitive buttons that can issue On/Off/Dim/Brighten commands. Built-in LED lights display the action buttons and vibration and touch beep functions help indicate when a touch command is recognized. Mount this remote Z-Wave controller onto a wall to have easy access to your Z-Wave devices. Fix the WallMote Quad's Back Mount Plate to a wall or flat surface. Program your WallMote to add it your Z-Wave network
    Aeon Labs Aeotec Z Wave Water Sensor
    Bring the next generation of Z-Wave control to your home with the Aeon Labs Aeotec Z-Wave Wallmote Quad. The Z-Wave Wallmote Quad takes control of up to 4 Z-Wave devices or scenes with touch sensitive buttons that can issue On/Off/Dim/Brighten commands. Built-in LED lights display the action buttons and vibration and touch beep functions help indicate when a touch command is recognized. Mount this remote Z-Wave controller onto a wall to have easy access to your Z-Wave devices.Control up to 4 Z-Wave devices with simple touch sensitive buttonsTouch, long press, or slide fingers to command Z-Wave devicesLEDs, audio alerts, and

    • UPC: 902345230
    • Model: AEZW130

  • Aeotec AEZW122 Z-Wave Water Sensor 6

    Our products are the perfect household device to keep you and your family's living conditions optimal. Not just reliable readings, the temperature is equipped to give you daily updates on the record humidity and temperature high and low of any given day, allowing you to compare the current readings to those of the past. FeaturesZ-Wave Water Sensor 6SpecificationsWeight: 0.1 lbs- SKU:
    Aeon Labs Aeotec Z Wave Water Sensor
    Our products are the perfect household device to keep you and your family's living conditions optimal. Not just reliable readings, the temperature is equipped to give you daily updates on the record humidity and temperature high and low of any given day, allowing you to compare the current readings to those of the past.FeaturesZ-Wave Water Sensor 6SpecificationsWeight: 0.1 lbs- SKU:

    • UPC: 436186187
    • Model: AEZW122
    • Color: Multicolor

  • Smart Home Automation with a Z-Wave Water Sensor from Aeotec

    Aeon Labs Aeotec Z Wave Water Sensor
    Your smart home automation should be able to detect leaks and floods in real-time. With the Z-Wave sensor from Aeotec its super simple and super accurate; can detect as little as 0.03% of an inch o...
    home automation,leak detector,water detector,Aeotec Water Sensor,Z-Wave Plus,temperature sensor,z...

    Aeotec Water Sensor 6 and Dock for Water Sensor 6 Review

    Aeon Labs Aeotec Z Wave Water Sensor
    My review of the Aeotec Water Sensor 6 and its companion dock. https://aeotec.com/professional-z-wave-water-leak-tool https://aeotec.com/z-wave-water-sensor Reddit: https://www.reddit.com/r/simp...
    home automation,smart home,connected home

    HOW-TO: Connect your Aeotec Water Sensor with an EcoNet Valve Controller via a SmartThings Hub

    Aeon Labs Aeotec Z Wave Water Sensor
    List of products included in this video: [ Samsung SmartThings Hub ] https://smarthomedb.com/product/samsung-smartthings-hub/p1027 [ Aeotec Water Sensor ] https://smarthomedb.com/product/aeotec-w...
    samsung,smartthings,hub,aeotec,water,sensor,aeon labs,aeon,econet,valve,controller,routines,robot...